Get the latest affordable golf rangefinder. Makes it easy to judge the distance of your next golf shot.
*** This is the Rangefinder PLUS that DOES Include the BATTERY (Most of these do not include the battery and it costs about $8-10)
7x18mDigital Optic Telescope Pocket Laser Golf Range Finder Rangefinder Golf Scope Yards Measure Distance Meter
This is a golf observation instrument that uses precision optics and digital technology to measure distance.
This is a very safe distance test device, without any form of energy radiation, without any damage and damage to the human body during the measurement of the distance.
Functions: 1. GREEN MODE.(Specially designed for golfers, you can easily get the distance between your holes)
2. GENERAL MODE.(Suitable for the general situation, first you put the target height into, you can measure the distance between the target and the object)
Great for use on the golf course to judge distance and club choice, allow you to choose the correct club with extreme precision based on distance.
Precision: Handy and portable, accurate speed and distance measurement, low deviation.
No Harm: No energy radiation, does not cause any damage to the human body during the measurement.
Two Functions: Green mode (lawn function) and other mode for choose. With this green mode, you can test the distance from you to the hole easily. With normal mode, you can measure the distance between you and the target.
Operation Manual: 1. Press the switch / adjust button to start the instrument will directly enter the lawn function.
2. When playing golf: a. The height (2.6 yards) of the scale in which the code is in is entered. b. Align the bottom line of the screen with the horizontal line of the lawn. c. The position of the scan line is raised to the top of the golf flagpole press the switch / adjustment key. d. The number will be at the top of the screen, indicating the distance between the ball and the hole.
3. Distance used for measuring special targets:
a. When the function key is used, the instrument enters the general functional state, and the screen displays three digits and one decimal point. b. Press the function key to move to the ten digit, and then press the switch / adjust key to enter the number, the range is 0 to 9. c. Repeat the above steps, set the number of bits and below the decimal point. d. Press the function key to finish the above input process. e. Depending on the height you enter, the screen will show the minimum distance you can measure. f. Align the bottom line of the screen with the lowest line of the object. g. Switch the position of the scan line up to the top of the target by pressing the switch / adjustment key. h. The number will appear at the top of the screen, indicating the distance between you and the target. Please input its height.